All of our industrial-grade laser-cutting machines are used in metal-cutting applications. For the application of more specific metal-type cutting, our technical engineers will recommend the most suitable model for you.

For other CO2 low-power laser machines, engraving on anodized metal and painted metal is supported. But not the bare metal  (This laser can only engrave on a few parts of bare metals directly by using the HR attachment at a very low speed).
If you need to engrave on bare metal, we would suggest you use thermark spray.

The cutting thickness of consumer-grade carbon dioxide takes the most commonly used wood board as an example. The maximum cutting thickness of Good-Laser HH001 is 20mm. The maximum cutting thickness of Good-laser HH002 is 15mm.

Yes, The Good-Laser machine supports four working processes including line drawing, cutting, and engraving (Deep engraving and shallow engraving processes. And deep engraving process will make the 3D engraving effect more obvious. You can choose the shallow carving process for laser 3D engraving according to the actual needs)

Some materials such as PVC and Vinyl that contain chlorine and other toxic material should never be put on your laser machine, it will release chlorine gas, and the gas is toxic that put your health on a risk situation, it also causes damage to your laser machine.

Yes and No. for the laser machine model with laser power high than 200W, you can start to cut metals. For the laser machines under the 200W laser power, it’s only suitable for laser engraving works.

Please confirm your application first and then we can recommend you a comprehensive materials list, or you can also check the details on our website page for each laser model to check through.

In theory, it is feasible to do so, but we do not recommend it, the effect of one-time cut is the best.