Desktop 3D Laser Cutter Engraver Accessories|Good-Laser

Accessories

Home > Support & Knowledge > Accessories

Good-Laser Light 530

RDC6445GT-HH Touch Screen Laser Controller

1. Support up to 4 channels of servo/stepping motor control.

2. Support 1-way extended serial port to communicate with EPLC-400, wireless handheld devices (BWK201R, BWK301R), and other devices with RS232 standard interface.

3. Support 4 OC gate outputs, which can directly drive 5V/24 relays.

4. Support mobile APP.

5. Support double-head electric mutual movement control and over-format cutting.

6. Support double-head asynchronous processing.

7. Support processing methods such as large format vision, mark point vision cutting and projection cutting.

8. Support controller and HMI firmware updating through U disk

9. Startup screen upgraded through software
CO2 laser Si reflective mirror lens

The laser mirror lens sold 3pcs as a kit, it uses a gold-plated film with a reflectivity higher than 96% and fast heat dissipation.
SPT TR90 / TR100 TR130 CO2 laser tube

The replaceable 60W to 130W laser CO2 tube with lengths from 1080mm to 1680mm.

Good-Laser Light 640

High-speed hybrid servo motor

The closed-loop high-speed hybrid is the standard motor on the Good-laser Light 640 series laser machine device. it works with low noise and high speed, Meanwhile, it has impact protection, stable operation, and high safety. More importantly, the motor provides ultra-fast acceleration to make sure that it does not lose steps for the laser cut and engrave works.
Air compressor

The Good-Laser Light 640 laser machine used in conjunction with high-pressure and low-noise air compressor includes two parts: the high-pressure and low-noise air compressor and the water separator for additional purchase.
Rotation axis

The custom-configured rotary axis was used to extend the Good-Laser Light 640 series laser machine. It can be used for cutting and engraving round items as an optional accessory.
Honeycomb Table

Material: Galvanized iron

Bore Diameter: Default 7.5mm

If you need 5.5mm or 9.5mm, please leave us a message
4” laser head

We have two kinds of laser heads which are 2” laser and 4” laser head, the 4” laser head provides a longer focal distance than the 2” standard laser head, for cutting thicker materials, and the cutting edges come out more smooth and straight.

Accessories

Black-Coating Silicon Reflective

Mirror Lens For Co2 Laser

Including the gold silicon mirror the single-sided polished, and the black silicon mirror is the double-sided polished, it provides good optical and thermal properties, and the approximately 99.6% reflectance.
CO2 Laser USA CVD ZnSe

Meniscus Focus Lens

The USA-made CVD ZnSe meniscus focus lens uses high-quality ZnSe crystal that has up to 200W CO2 laser resistance and a superb coating process with a laser transmittance of up to 99.8%.
Outer Sliding Rails

Fast running speed and low noise.
Compact structure and beautiful appearance.
Equipped with U-shaped bearing roller.
The aluminum base of the guide rail is relatively resistant to corrosion and is inlaid with a steel shaft.
Superior for light and medium loads.
Industrial chiller for

100W laser tube

The highly-efficient industrial-grade chiller for multiple applications including CO2 laser engraving & cutting, router, UV printer and more.
60W-150W CO2 Laser

Power Supply With LCD Display

Two optional type for AC115V and 230V input, stable operation up to 92% efficient and responding speed ≤1ms.
CO2 Laser marking/engraving/ cutting machine materials

Different kinds of CO2 laser material bag (32 pics in total)

1* PU Leather Mouse Pad (Color Random:10"x12")

1* Solid-wood Phone Holder (3"x2"x0.8")

2* Pine Coaster (4"x4")

5* Basswood Plywood (12"x8"x0.1")

5* Solid Wood Key Chain (1.8"x1.4"x0.3")

2* Wooden Seal (2"x2"x1.6")

1* A4 Rubber Mat (Color Random:12"x8"x0.1")

15* Leoni Cardboard (Color Random:12"x8"x0.1")
Standard Laser Cutting and Engraving Card

RDC6442G system based on the 3.5-inch color screen has a more friendly operation interface and more powerful functions. The controller has more complete and better motion control functions, on-board file storage, more compatible U flash disk driver and multi-channel general/ special IO control. It supports the Ethernet and USB communication with PC
Standard Laser Cutting and Engraving Card

RDC6445G has more complete and better motion control functions, large file storage, more compatible dual channel independent adjustable laser power control interface, more compatible U flash disk driver and multi-channel general/ special IO control. It supports Ethernet communication and USB communication with PC. Furthermore, it supports fixed single/ double laser head processing, double head synchronous processing and ultra-wide segmentation cutting. And its extended model supports functions like Mark point vision positioning cutting, large format panoramic visual cutting, projection cutting and double head asynchronous processing.